Oh, what's to tell? I was at the orphanage till I was 18, then I got my job at a souvenir stand. Oh, and once I saw a blimp.
135 stories
·
0 followers

Netflix just launched the simplest internet speed test ever

1 Comment

Netflix has just launched what is probably the simplest speed test on the Web. It’s called Fast.com It’s incredibly minimal, and loads pretty much immediately, probably because there are no ads. It only measures your internet service provider’s (ISP) download speed, which it will present in huge digits after a few seconds of testing. And that’s it. A frequently asked questions section that keeping the site minimal was a conscious choice: Fast.com is a simple-to-use way for consumers to estimate what speed their ISP is providing. It is not a network engineer’s analysis and diagnostic suite. Netflix does provide the option to compare your…

This story continues at The Next Web
Read the whole story
ryanco
3071 days ago
reply
Simple with no bullshit.
Share this story
Delete

What This Video Of A Drone Fishing For Tuna Can Teach You About Disruption

1 Comment

Drones and fishing had nothing to do with each other until someone decided they could. Here's what an agile mind-set's made of.

Want to know what disruption looks like? Take a look at this video of a few Australian guys beach-fishing for tuna with the help of a drone.

Read Full Story



Read the whole story
ryanco
3076 days ago
reply
I'm not big into drones but this is kind of cool.
Share this story
Delete

Unofficial guide to dotfiles on GitHub

1 Share
Comments
Read the whole story
ryanco
3229 days ago
reply
Share this story
Delete

Linux Performance Analysis in 60,000 Milliseconds

1 Comment and 6 Shares
You login to a Linux server with a performance issue: what do you check in the first minute?

At Netflix we have a massive EC2 Linux cloud, and numerous performance analysis tools to monitor and investigate its performance. These include Atlas for cloud-wide monitoring, and Vector for on-demand instance analysis. While those tools help us solve most issues, we sometimes need to login to an instance and run some standard Linux performance tools.

In this post, the Netflix Performance Engineering team will show you the first 60 seconds of an optimized performance investigation at the command line, using standard Linux tools you should have available.

First 60 Seconds: Summary

In 60 seconds you can get a high level idea of system resource usage and running processes by running the following ten commands. Look for errors and saturation metrics, as they are both easy to interpret, and then resource utilization. Saturation is where a resource has more load than it can handle, and can be exposed either as the length of a request queue, or time spent waiting.

uptime
dmesg | tail
vmstat 1
mpstat -P ALL 1
pidstat 1
iostat -xz 1
free -m
sar -n DEV 1
sar -n TCP,ETCP 1
top
Some of these commands require the sysstat package installed. The metrics these commands expose will help you complete some of the USE Method: a methodology for locating performance bottlenecks. This involves checking utilization, saturation, and error metrics for all resources (CPUs, memory, disks, e.t.c.). Also pay attention to when you have checked and exonerated a resource, as by process of elimination this narrows the targets to study, and directs any follow on investigation.

The following sections summarize these commands, with examples from a production system. For more information about these tools, see their man pages.

1. uptime


$ uptime
23:51:26 up 21:31, 1 user, load average: 30.02, 26.43, 19.02
This is a quick way to view the load averages, which indicate the number of tasks (processes) wanting to run. On Linux systems, these numbers include processes wanting to run on CPU, as well as processes blocked in uninterruptible I/O (usually disk I/O). This gives a high level idea of resource load (or demand), but can’t be properly understood without other tools. Worth a quick look only.

The three numbers are exponentially damped moving sum averages with a 1 minute, 5 minute, and 15 minute constant. The three numbers give us some idea of how load is changing over time. For example, if you’ve been asked to check a problem server, and the 1 minute value is much lower than the 15 minute value, then you might have logged in too late and missed the issue.

In the example above, the load averages show a recent increase, hitting 30 for the 1 minute value, compared to 19 for the 15 minute value. That the numbers are this large means a lot of something: probably CPU demand; vmstat or mpstat will confirm, which are commands 3 and 4 in this sequence.

2. dmesg | tail


$ dmesg | tail
[1880957.563150] perl invoked oom-killer: gfp_mask=0x280da, order=0, oom_score_adj=0
[...]
[1880957.563400] Out of memory: Kill process 18694 (perl) score 246 or sacrifice child
[1880957.563408] Killed process 18694 (perl) total-vm:1972392kB, anon-rss:1953348kB, file-rss:0kB
[2320864.954447] TCP: Possible SYN flooding on port 7001. Dropping request. Check SNMP counters.
This views the last 10 system messages, if there are any. Look for errors that can cause performance issues. The example above includes the oom-killer, and TCP dropping a request.

Don’t miss this step! dmesg is always worth checking.

3. vmstat 1


$ vmstat 1
procs ---------memory---------- ---swap-- -----io---- -system-- ------cpu-----
r b swpd free buff cache si so bi bo in cs us sy id wa st
34 0 0 200889792 73708 591828 0 0 0 5 6 10 96 1 3 0 0
32 0 0 200889920 73708 591860 0 0 0 592 13284 4282 98 1 1 0 0
32 0 0 200890112 73708 591860 0 0 0 0 9501 2154 99 1 0 0 0
32 0 0 200889568 73712 591856 0 0 0 48 11900 2459 99 0 0 0 0
32 0 0 200890208 73712 591860 0 0 0 0 15898 4840 98 1 1 0 0
^C
Short for virtual memory stat, vmstat(8) is a commonly available tool (first created for BSD decades ago). It prints a summary of key server statistics on each line.

vmstat was run with an argument of 1, to print one second summaries. The first line of output (in this version of vmstat) has some columns that show the average since boot, instead of the previous second. For now, skip the first line, unless you want to learn and remember which column is which.

Columns to check:
  • r: Number of processes waiting for a turn on CPU. This provides a better signal than load averages for determining CPU saturation, as it does not include I/O. To interpret: an “r” value greater than the CPU count is saturation.
  • free: free: Free memory in kilobytes. If there are too many digits to count, you have enough free memory. The “free -m” command, included as command 7, better explains the state of free memory.
  • si, so: Swap-ins and swap-outs. If these are non-zero, you’re out of memory.
  • us, sy, id, wa, st: These are breakdowns of CPU time, on average across all CPUs. They are user time, system time (kernel), idle, wait I/O, and stolen time (by other guests, or with Xen, the guest's own isolated driver domain).
The CPU time breakdowns will confirm if the CPUs are busy, by adding user + system time. A constant degree of wait I/O points to a disk bottleneck; this is where the CPUs are idle, because tasks are blocked waiting for pending disk I/O. You can treat wait I/O as another form of CPU idle, one that gives a clue as to why they are idle.

System time is necessary for I/O processing. A high system time average, over 20%, can be interesting to explore further: perhaps the kernel is processing the I/O inefficiently.

In the above example, CPU time is almost entirely in user-level, pointing to application level usage instead. The CPUs are also well over 90% utilized on average. This isn’t necessarily a problem; check for the degree of saturation using the “r” column.

4. mpstat -P ALL 1


$ mpstat -P ALL 1
Linux 3.13.0-49-generic (titanclusters-xxxxx) 07/14/2015 _x86_64_ (32 CPU)

07:38:49 PM CPU %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle
07:38:50 PM all 98.47 0.00 0.75 0.00 0.00 0.00 0.00 0.00 0.00 0.78
07:38:50 PM 0 96.04 0.00 2.97 0.00 0.00 0.00 0.00 0.00 0.00 0.99
07:38:50 PM 1 97.00 0.00 1.00 0.00 0.00 0.00 0.00 0.00 0.00 2.00
07:38:50 PM 2 98.00 0.00 1.00 0.00 0.00 0.00 0.00 0.00 0.00 1.00
07:38:50 PM 3 96.97 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 3.03
[...]
This command prints CPU time breakdowns per CPU, which can be used to check for an imbalance. A single hot CPU can be evidence of a single-threaded application.

5. pidstat 1


$ pidstat 1
Linux 3.13.0-49-generic (titanclusters-xxxxx) 07/14/2015 _x86_64_ (32 CPU)

07:41:02 PM UID PID %usr %system %guest %CPU CPU Command
07:41:03 PM 0 9 0.00 0.94 0.00 0.94 1 rcuos/0
07:41:03 PM 0 4214 5.66 5.66 0.00 11.32 15 mesos-slave
07:41:03 PM 0 4354 0.94 0.94 0.00 1.89 8 java
07:41:03 PM 0 6521 1596.23 1.89 0.00 1598.11 27 java
07:41:03 PM 0 6564 1571.70 7.55 0.00 1579.25 28 java
07:41:03 PM 60004 60154 0.94 4.72 0.00 5.66 9 pidstat

07:41:03 PM UID PID %usr %system %guest %CPU CPU Command
07:41:04 PM 0 4214 6.00 2.00 0.00 8.00 15 mesos-slave
07:41:04 PM 0 6521 1590.00 1.00 0.00 1591.00 27 java
07:41:04 PM 0 6564 1573.00 10.00 0.00 1583.00 28 java
07:41:04 PM 108 6718 1.00 0.00 0.00 1.00 0 snmp-pass
07:41:04 PM 60004 60154 1.00 4.00 0.00 5.00 9 pidstat
^C
Pidstat is a little like top’s per-process summary, but prints a rolling summary instead of clearing the screen. This can be useful for watching patterns over time, and also recording what you saw (copy-n-paste) into a record of your investigation.

The above example identifies two java processes as responsible for consuming CPU. The %CPU column is the total across all CPUs; 1591% shows that that java processes is consuming almost 16 CPUs.

6. iostat -xz 1


$ iostat -xz 1
Linux 3.13.0-49-generic (titanclusters-xxxxx) 07/14/2015 _x86_64_ (32 CPU)

avg-cpu: %user %nice %system %iowait %steal %idle
73.96 0.00 3.73 0.03 0.06 22.21

Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util
xvda 0.00 0.23 0.21 0.18 4.52 2.08 34.37 0.00 9.98 13.80 5.42 2.44 0.09
xvdb 0.01 0.00 1.02 8.94 127.97 598.53 145.79 0.00 0.43 1.78 0.28 0.25 0.25
xvdc 0.01 0.00 1.02 8.86 127.79 595.94 146.50 0.00 0.45 1.82 0.30 0.27 0.26
dm-0 0.00 0.00 0.69 2.32 10.47 31.69 28.01 0.01 3.23 0.71 3.98 0.13 0.04
dm-1 0.00 0.00 0.00 0.94 0.01 3.78 8.00 0.33 345.84 0.04 346.81 0.01 0.00
dm-2 0.00 0.00 0.09 0.07 1.35 0.36 22.50 0.00 2.55 0.23 5.62 1.78 0.03
[...]
^C
This is a great tool for understanding block devices (disks), both the workload applied and the resulting performance. Look for:
  • r/s, w/s, rkB/s, wkB/s: These are the delivered reads, writes, read Kbytes, and write Kbytes per second to the device. Use these for workload characterization. A performance problem may simply be due to an excessive load applied.
  • await: The average time for the I/O in milliseconds. This is the time that the application suffers, as it includes both time queued and time being serviced. Larger than expected average times can be an indicator of device saturation, or device problems.
  • avgqu-sz: The average number of requests issued to the device. Values greater than 1 can be evidence of saturation (although devices can typically operate on requests in parallel, especially virtual devices which front multiple back-end disks.)
  • %util: Device utilization. This is really a busy percent, showing the time each second that the device was doing work. Values greater than 60% typically lead to poor performance (which should be seen in await), although it depends on the device. Values close to 100% usually indicate saturation.
If the storage device is a logical disk device fronting many back-end disks, then 100% utilization may just mean that some I/O is being processed 100% of the time, however, the back-end disks may be far from saturated, and may be able to handle much more work.

Bear in mind that poor performing disk I/O isn’t necessarily an application issue. Many techniques are typically used to perform I/O asynchronously, so that the application doesn’t block and suffer the latency directly (e.g., read-ahead for reads, and buffering for writes).

7. free -m


$ free -m
total used free shared buffers cached
Mem: 245998 24545 221453 83 59 541
-/+ buffers/cache: 23944 222053
Swap: 0 0 0
The right two columns show:
  • buffers: For the buffer cache, used for block device I/O.
  • cached: For the page cache, used by file systems.
We just want to check that these aren’t near-zero in size, which can lead to higher disk I/O (confirm using iostat), and worse performance. The above example looks fine, with many Mbytes in each.

The “-/+ buffers/cache” provides less confusing values for used and free memory. Linux uses free memory for the caches, but can reclaim it quickly if applications need it. So in a way the cached memory should be included in the free memory column, which this line does. There’s even a website, linuxatemyram, about this confusion.

It can be additionally confusing if ZFS on Linux is used, as we do for some services, as ZFS has its own file system cache that isn’t reflected properly by the free -m columns. It can appear that the system is low on free memory, when that memory is in fact available for use from the ZFS cache as needed.

8. sar -n DEV 1


$ sar -n DEV 1
Linux 3.13.0-49-generic (titanclusters-xxxxx) 07/14/2015 _x86_64_ (32 CPU)

12:16:48 AM IFACE rxpck/s txpck/s rxkB/s txkB/s rxcmp/s txcmp/s rxmcst/s %ifutil
12:16:49 AM eth0 18763.00 5032.00 20686.42 478.30 0.00 0.00 0.00 0.00
12:16:49 AM lo 14.00 14.00 1.36 1.36 0.00 0.00 0.00 0.00
12:16:49 AM docker0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

12:16:49 AM IFACE rxpck/s txpck/s rxkB/s txkB/s rxcmp/s txcmp/s rxmcst/s %ifutil
12:16:50 AM eth0 19763.00 5101.00 21999.10 482.56 0.00 0.00 0.00 0.00
12:16:50 AM lo 20.00 20.00 3.25 3.25 0.00 0.00 0.00 0.00
12:16:50 AM docker0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
^C
Use this tool to check network interface throughput: rxkB/s and txkB/s, as a measure of workload, and also to check if any limit has been reached. In the above example, eth0 receive is reaching 22 Mbytes/s, which is 176 Mbits/sec (well under, say, a 1 Gbit/sec limit).

This version also has %ifutil for device utilization (max of both directions for full duplex), which is something we also use Brendan’s nicstat tool to measure. And like with nicstat, this is hard to get right, and seems to not be working in this example (0.00).

9. sar -n TCP,ETCP 1


$ sar -n TCP,ETCP 1
Linux 3.13.0-49-generic (titanclusters-xxxxx) 07/14/2015 _x86_64_ (32 CPU)

12:17:19 AM active/s passive/s iseg/s oseg/s
12:17:20 AM 1.00 0.00 10233.00 18846.00

12:17:19 AM atmptf/s estres/s retrans/s isegerr/s orsts/s
12:17:20 AM 0.00 0.00 0.00 0.00 0.00

12:17:20 AM active/s passive/s iseg/s oseg/s
12:17:21 AM 1.00 0.00 8359.00 6039.00

12:17:20 AM atmptf/s estres/s retrans/s isegerr/s orsts/s
12:17:21 AM 0.00 0.00 0.00 0.00 0.00
^C
This is a summarized view of some key TCP metrics. These include:
  • active/s: Number of locally-initiated TCP connections per second (e.g., via connect()).
  • passive/s: Number of remotely-initiated TCP connections per second (e.g., via accept()).
  • retrans/s: Number of TCP retransmits per second.
The active and passive counts are often useful as a rough measure of server load: number of new accepted connections (passive), and number of downstream connections (active). It might help to think of active as outbound, and passive as inbound, but this isn’t strictly true (e.g., consider a localhost to localhost connection).

Retransmits are a sign of a network or server issue; it may be an unreliable network (e.g., the public Internet), or it may be due a server being overloaded and dropping packets. The example above shows just one new TCP connection per-second.

10. top


$ top
top - 00:15:40 up 21:56, 1 user, load average: 31.09, 29.87, 29.92
Tasks: 871 total, 1 running, 868 sleeping, 0 stopped, 2 zombie
%Cpu(s): 96.8 us, 0.4 sy, 0.0 ni, 2.7 id, 0.1 wa, 0.0 hi, 0.0 si, 0.0 st
KiB Mem: 25190241+total, 24921688 used, 22698073+free, 60448 buffers
KiB Swap: 0 total, 0 used, 0 free. 554208 cached Mem

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
20248 root 20 0 0.227t 0.012t 18748 S 3090 5.2 29812:58 java
4213 root 20 0 2722544 64640 44232 S 23.5 0.0 233:35.37 mesos-slave
66128 titancl+ 20 0 24344 2332 1172 R 1.0 0.0 0:00.07 top
5235 root 20 0 38.227g 547004 49996 S 0.7 0.2 2:02.74 java
4299 root 20 0 20.015g 2.682g 16836 S 0.3 1.1 33:14.42 java
1 root 20 0 33620 2920 1496 S 0.0 0.0 0:03.82 init
2 root 20 0 0 0 0 S 0.0 0.0 0:00.02 kthreadd
3 root 20 0 0 0 0 S 0.0 0.0 0:05.35 ksoftirqd/0
5 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0H
6 root 20 0 0 0 0 S 0.0 0.0 0:06.94 kworker/u256:0
8 root 20 0 0 0 0 S 0.0 0.0 2:38.05 rcu_sched
The top command includes many of the metrics we checked earlier. It can be handy to run it to see if anything looks wildly different from the earlier commands, which would indicate that load is variable.

A downside to top is that it is harder to see patterns over time, which may be more clear in tools like vmstat and pidstat, which provide rolling output. Evidence of intermittent issues can also be lost if you don’t pause the output quick enough (Ctrl-S to pause, Ctrl-Q to continue), and the screen clears.

Follow-on Analysis


There are many more commands and methodologies you can apply to drill deeper. See Brendan’s Linux Performance Tools tutorial from Velocity 2015, which works through over 40 commands, covering observability, benchmarking, tuning, static performance tuning, profiling, and tracing.

Tackling system reliability and performance problems at web scale is one of our passions. If you would like to join us in tackling these kinds of challenges we are hiring!
Read the whole story
ryanco
3241 days ago
reply
Share this story
Delete
1 public comment
JayM
3241 days ago
reply
.
Atlanta, GA

Creating standalone Mac OS X applications with Python and py2app

1 Share
submitted by waawal
[link] [1 comment] [comment]
Read the whole story
ryanco
3242 days ago
reply
Share this story
Delete

Proposal for New REST Methods

2 Shares
PLEASE Move previous request ahead in queue by one position. ICANT End session and delete account. WTF Send email to system administrator reminding them to update the documentation. GRRM Delete a major, user-friendly application at random. Returns no explanation. APPLE Returns ...
Read the whole story
ryanco
3492 days ago
reply
Share this story
Delete
Next Page of Stories